iMotion SW111, User Manual

Page: 103 / 313

iWaylink Inc.
103
Enter End
*/$%ENTR* *ZEND*
7-2-9 Wait Add on Time
Wait for decoding additional code, need to use” Wait Add
-
on” ; If to get the
additional code in a specified decoding time, then indicate, otherwise do not
indicate.
*KVE+*
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Wait Addon Time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 20 ms, the
parameter value is 20 ms / 1 ms = 20
7-2-10 ConvertUpcaToEan13
When UPC-A Converted to EAN-13 is selected, UPC-A bar codes are
converted to 13 digit EAN-13 codes by adding a zero to the front.
*JV40*
Convert
*JV41*
Off
Configuration Range Unit Default Setting
0~500 ms 1 ms 120 ms