iMotion SW111, User Manual

Page: 312 / 313

iWaylink Inc.
312
Enter End
*/%$ENTR* *XEND*
5 Other Dongle Setting
5-1Get Dongle Mac Address
*Receiving scan data by different interface *
1. Use Word, Excel to receive scan data if interface is HID
2. Plug in the dongle into PC USB port, and then insert the clip to dongle
[reset] (below photo) to get the 12 digits BLE Mac address.
3. Use
“
Terminal
”
to receive scan data if interface is USB COM
4. Plug in the dongle into PC USB port, make sure the number of Connecting
COM port by Device Manager, open the “Terminal” to
connect this connect
COM Port.
5. Clip the dongle [reset] (below photo) to get the 12 digits BLE Mac address.
BLE Mac: 1A15D981C8F4
★
Note : Please control the time within 0.5 seconds when clip the [reset] hole,
or it will back to Factory default and influence the scanner original setting.