The manufacturer declines all liability due to printing or transcription errors, reserving the right to make any modifications to its technical and commercial
documents without prior notice.
Dear Client,
Our compliments for having chosen a top-quality Hunt Heating/Immergas product, able to assure well-being and safety for a long period of time, you can also
count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your boiler. Read the following pages carefully; you will be able
to draw useful suggestions regarding the correct use of the appliance, the respect of which, will confirm your satisfaction for our product.
For any interventions or routine maintenance contact Hunt Heating for Authorised Service Personal.
General recommendations
All Immergas products are protected with packaging suitable for transport.
The material must be stored in dry environments and protected from bad weather.
The instruction book is an integral and essential part of the product and must be consigned to the new user also in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
This instruction booklet contains technical information on how installing Immergas boilers. For other issues related to installation of boilers (i.e.: safety in work
sites, environment protection, injury prevention), comply with the laws in force and technical standards.
In compliance with legislation, the systems must be designed by qualified professionals, within the dimensional limits established by the Law. Installation and
maintenance must be performed in compliance with the regulations in force, according to the manufacturer’s instructions and by qualified professionals.
Improper installation or assembly of Immergas appliance and/or components, accessories, kit and devices can cause unexpected problems to persons, animals
and objects. Read the provided product instructions carefully in order to install the product correctly.
Maintenance must be carried out by Authorised Service Personal.
The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially
dangerous.
If errors occur during installation, operation and maintenance, due to non compliance with technical laws in force, standards or instructions contained in this
book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damages and the
appliance warranty is invalidated.
Introduction
The Immergas range of high efficiency boilers are wall mounted, fan assisted, room-sealed boilers. The burner is lit electronically and the heat output is
controlled by a modulating gas valve.
The VICTRIX PRO 55 1A is a heating only boilers used for hydronic heating. Domestic hot water is an available option (Hunt Heating only) used in con-
junction with a stainless steel hot water storage tank, diverter valve and probe.
The boilers are supplied with a pump, pressure relief valve, pressure gauge fully assembled and tested. They are designed for use with a fully sealed and
pressurised central heating system using only Natural Gas or LPG. The VICTRIX PRO 55 1A is suitable for central heating loads of between 5,0 and 49,9 kW.
IMPORTANT
It is the law that all gas appliances are installed by a qualified and registered technician in accordance with local laws and AS/NZS 5601.
This appliance meets the requirements of IPX5D.
Failure to install this appliance correctly could lead to prosecution. It is in your own interest and that of safety to ensure that the law is complied with.
Manufacturerís instructions must NOT be taken in anyway as over-riding statutory obligations.
WARNINGS
- Do not spray aerosols in the vicinity of this appliance while it is in operation;
- do not use or store flammable materials in or near this appliance;
- do not place articles on or against this appliance;
- do not modify this appliance.
NOTE
The Boilers MUST only be used with Immergas Condensing flue components.
THIS BOILER IS NOT SUITABLE FOR POOL OR SPA HEATER UNLESS CONNECTED TO A SUITABLE APPROVED HEAT EXCHANGER.
On conformity to AS/NZS 5263.1.2
