background image

2-1

21

INS

T

ALLER

US

ER

MAINTEN

AN

CE TECHNI

CI

AN

2

  USE AND MAINTENANCE 

INSTRUCTIONS

2.1  CLEANING AND MAINTENANCE.
Attention: 

to preserve the boiler's integrity and 

keep the safety features, performance and relia-
bility, which distinguish it, unchanged over time, 
you must at least execute maintenance operations 
on a yearly basis in compliance with what is stated 
in the relative point at “annual check and main-
tenance of the appliance”. Annual maintenance 
is essential to validate the conventional warranty 
of Immergas. We recommend stipulating a yearly 
cleaning  and  maintenance  contract  with  your 
zone Immergas Authorised After-sales Service.

2.2  GENERAL WARNINGS.

Never expose the wall-mounted boiler to direct 
vapours from a cooking surface.

Use of the boiler by unskilled persons or children 
is strictly prohibited.

For  safety  purposes,  check  that  the  concentric 
air  intake/flue  exhaust  terminal  (if  fitted),  is 
not blocked.

If temporary shutdown of the boiler is required, 
proceed as follows:
a) drain  the  heating  system  if  antifreeze  is  not 

used;

b) shut-off all electrical, water and gas supplies.

In the case of work or maintenance to structures 
located in the vicinity of ducting or devices for 
flue extraction and relative accessories, switch off 
the appliance and on completion of operations 
ensure that a qualified technician checks efficien-
cy of the ducting or other devices.
Never  clean  the  appliance  or  connected  parts 
with easily flammable substances.
Never leave containers or flammable substances 
in the same environment as the appliance.

 

Attenzione:

 the use of components involving 

use of electrical power requires some funda-
mental rules to be observed:

  -  do not touch the appliance with wet or moist 

parts of the body; do not touch when bare-
foot;

  -  never pull electrical cables or leave the appli-

ance exposed to weathering (rain, sunlight, 
etc.);

  -  the  appliance  power  cable  must  not  be  re-

placed by the user;

  -  in the event of damage to the cable, switch 

off  the  appliance  and  contact  exclusively 
qualified staff for replacement;

  -  if the appliance is not to be used for a certain 

period, disconnect the main power switch.

N.B.:

 the temperatures indicated by the display 

have a tolerance of 

+

/- 3°C due to environmental 

conditions that cannot be attributed to the boiler.

2.3  CONTROL PANEL.

Key:

*

  1  -  Domestic hot water temperature selector

  2  -  Reset button
  3  -  Summer / Winter Button
  4  -  Central heating temperature selector
  5  -  Information button
  6  -  Off / Stand-by / On button
  7  -  Boiler manometer

*

 

8

  -  DHW production phase operating mode 

active

 

9

  -  Boiler in block requiring unblock via 

“RESET” button

  1

0

  -  Flame presence symbol and relative 

power scale

  11  -  Functioning in summer mode
  12  -  Functioning in winter mode
  13  -  Room central heating phase operating 

mode active

  14  -  Temperature indicator, boiler info and 

error codes

  15  -  Boiler in Stand-by mode
  16  -  Presence of external connected devices

  17  -  Not used on this model
  1

8

  -  Functioning with external temperature 

probe active (optional)

  1

9

  -  Boiler connected to remote control 

V2

 

(optional)

  2

0

  -  Not used on this model

* N.B.:

  (when the boiler is connected to an 

external storage tank unit)

Summary of Contents for VICTRIX 20X TT 1E









































Reviews: