Immergas 3.020857 Instruction Booklet And Warning Download Page 3

Dear Customer,

Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer 

you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your boiler. Read the following pages carefully: you 

will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will confirm your satisfaction for the Immergas product.
For any interventions or routine maintenance contact Authorised Centres: these have original spare parts and boast of specific preparation directly from the 

manufacturer.

General recommendations

All Immergas products are protected with suitable transport packaging. 
The material must be stored in dry environments protected against bad weather.
The instruction book is an integral and essential part of the product and must be consigned to the new user also in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
This instruction manual provides technical information for installing the Immergas kit. As for the other issues related to boiler installation (e.g. safety in the 

work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the current regulation and technical standards.
In compliance with legislation in force, the systems must be designed by qualified professionals, within the dimensional limits established by the Law. Installation 

and maintenance must be performed in compliance with the regulations in force, according to the manufacturer’s instructions and by an authorised company, 

which has specific technical expertise in the system sector, as required by Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kit and devices can cause unexpected problem to persons, animals 

and objects. Read the instructions provided with the product carefully to ensure a proper installation.
Maintenance must be carried out by an authorised company. The Authorised After-sales Service represents a guarantee of qualification and professionalism.
The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially 

dangerous. 
If errors occur during installation, operation and maintenance, due to non compliance with technical laws in force, standards or instructions contained in this 

book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damages and the 

appliance warranty is invalidated. 

Product not intended for EU countries.

The manufacturer declines all liability due to printing or transcription errors, reserving the right to make any modifications to its technical and commercial 

documents without forewarning.

Summary of Contents for 3.020857





























Reviews: