4
SFx80_V1.1_210710_EN
Safety
3
Safety
3.1
Safety instructions
DANGER
Risk of fatal electric shock or serious injury when touching live parts.
•
Do not use the SlideFeeder x80 if the power cable, plug or other
parts of the electrical equipment are damaged.
•
Check electrical equipment regularly.
•
Any defects found in electrical components must be reported immedi-
ately and rectified by a qualified electrician.
•
Work on electrical components may only be carried out by a qualified
electrician. Observe the locally applicable regulations and guidelines
for installation and operation.
CAUTION
Risk of injury from slipping, tripping and falling.
•
Lay cables carefully.
•
Do not leave any tools or machine parts on the floor.
•
Wear personal protective equipment (PPE).
CAUTION
Risk of injury from carrying loads that are too heavy.
•
Observe the limit values for lifting and carrying loads.
•
Use suitable lifting gear for transport.
CAUTION
Danger of crushing due to moving machine parts.
•
Before starting maintenance and repair work, safely switch off mov-
ing parts of the machine and allow it to come to a complete standstill.
•
Secure moving parts and power supply against being switched on
again.
•
The machine may only be repaired by trained specialists.
•
The safety instructions in the operating manual must be observed.
3.2
Procedure in a case of emergency
•
In an emergency, immediately disconnect the machine from the operator's power
supply.
•
Secure the work area extensively with suitable measures.
•
Inform the operating personnel and designate a supervisor.
