SFx80_V1.1_210710_EN
7
Safety
Uncovering undetected risks
The operator is obliged to cooperate in the detection of unrecognised risks. In particular,
the operator must do the following:
•
Carry out a risk assessment on the basis of the Occupational Health and Safety Act,
the Ordinance on Industrial Safety and Health or national regulations.
•
Report any undetected hazards that have not yet been warned of in these operating
instructions to the manufacturer.
•
Report accidents and near-accidents to the manufacturer.
3.5
Operating the machine safely
The following must be ensured in all life phases of the machine:
•
Operate the machine as intended, only in technically perfect condition and with an
awareness of safety and the dangers involved.
•
Observe the operating data.
•
Stop the machine immediately in the following cases:
•
Suspicion of faults in the power supply or fault currents.
•
Faults in the machine monitoring/control system or other incorrect functioning of
the machine.
•
Wear the prescribed personal protective equipment.
•
Do not touch moving parts during operation.
•
Lay cables carefully so that they do not become a trip hazards. Always store tools
and machine parts in the designated place after use. Make sure the surface is clean
and non-slip.