Please unfold page 3. Then you can always
see the operating elements described in the
figures.
1 Operating Elements
1.1 Fig. 1: Hand-held microphone
1 Microphone cartridge; to insert batteries,
unscrew the cartridge (figs. 2 to 4)
2 LC display; indicates the transmission fre-
quency and the charging status of the batte-
ries during operation
3 Cap for the control part; remove the cap for
operation (fig. 5)
4 Power switch
1.2 Figs. 2 to 4: Inserting batteries
(microphone cartridge unscrewed)
5 4-pole contact, each on the microphone
cartridge (fig. 2) and on the handle (fig. 3);
prior to assembling microphone cartridge
and handle, fit the contacts together
6 Lock for the battery holder (7); to unlock the
holder, press the lock in arrow direction
backwards
7 Battery holder for two 1.5 V batteries of size
AA (R6)
1.3 Fig. 5: Control part (cap removed)
8 Key SET
with the unit not locked:
for recalling and exiting the adjusting
modes for frequency/sensitivity/lock func-
tion
→
chapters 5.1, 5.2, and 5.3.1
with the unit locked:
for recalling and exiting the adjusting
mode for the lock function
→
chapter 5.3.2
9 Key
for reducing the frequency (in the fre-
quency adjusting mode) or the sensitivity (in
the sensitivity adjusting mode) and for deac-
tivating the lock function (in the lock mode)
10 Key
for increasing the frequency (in the
frequency adjusting mode) or the sensitivity
(in the sensitivity adjusting mode) and for
activating the lock mode (in the lock mode)
2 Important Notes
●
The unit is suitable for indoor use only. Pro-
tect it against dripping water and splash
water, high air humidity, and heat (admissible
ambient temperature range 0 – 40 °C).
●
For cleaning only use a dry, soft cloth, by no
means chemicals or water.
●
No guarantee claims for the unit and no lia-
bility for any resulting personal damage or
material damage will be accepted if the unit is
used for other purposes than originally intend-
ed, if it is not correctly operated or not re-
paired in an expert way.
3 Applications
In combination with the multifrequency receiver
TXS-870 from “img Stage Line” this dynamic
hand-held microphone with integrated multifre-
quency transmitter makes up a wireless audio
transmission system. Within the UHF frequency
range of 790 – 814 MHz, the transmission fre-
quency can be selected as desired (frequency
spacing 125 kHz).
The microphone is supplied with a micro-
phone case, a microphone holder, and 7 plastic
push-on caps of different colours.
3.1 Conformity and Approval of the wire-
less microphone
Herewith, MONACOR INTERNATIONAL de-
clare that the unit TXS-870HT is in accordance
with the basic requirements and the other rele-
vant regulations of the directive 1995/5/EC. The
declaration of conformity can be found in the
Internet via the MONACOR INTERNATIONAL
home page (www.imgstageline.com). The ap-
proval number is
.
This unit may be operated in the following coun-
tries:
DE, DK, AT
The regulations of the country where this unit is
operated must always be observed. These reg-
ulations can be found via links to the national
authorities from the following Internet address:
www.ec.europa.eu/enterprise/rtte/weblinks.htm
0197
!
If the unit is to be put out of operation defini-
tively, take it to a local recycling plant for a dis-
posal which is not harmful to the environment.
Do not put exhausted batteries / defective rechargeable
batteries into the household rubbish but take them to a
special waste disposal (e. g. collective container at your
retailer).
7
GB
