10/56
M880 ALL EN 2.7.2.docx
7. INSTALLING THE RADIO REMOTE CONTROL
We recommend following the instructions below, in order to set up a properly operating radio remote
control system.
The radio remote control should be installed by qualified personnel only.
Install the receiving unit or its antenna (in case of versions with an external antenna) in the line
of sight of the transmitting unit, with
no electromagnetic shielding. To
improve the operating range when
the antenna is integrated, do not
install the unit on metal surfaces, if
possible.
Do not bypass the machine’s safety
systems; follow the manufacturer’s
instructions
.
Do not install the receiving unit too high
above the ground (10
20 metres). At
these heights the unit may receive local
radio signals that could disturb
transceiving operations.
To prevent water infiltrations, install the receiving unit
vertically, with the cable clamps and any other connections at
the bottom, as shown in the figure.
In case of strong mechanical vibrations, place a rubber shock-absorber between the machine and the
receiver (dampers).
STO
P
T
E
S
E
R
S E
R
T
E
RE
SE T
P
O
T
S
RF
ANTENNA
ANTENNA
RF
S
TO
P
T
E
S
E
R
E
T
RE
S
R
E
S
E
T
P
O
T
S
RECOMMENDED
1 Non-attenuating obstacle
2 Partially attenuating
obstacle
3 Shielding obstacle