Page
8
START / STOP
Switch the chosen cycle at switched off machine
COOLING
(
+70°C
-
+5°C
)
Prepares
with
plus temperature or anyway 0°C approaches the
machine the cooling in front of.
THIS IS TEMPERATURE
-
WORTH
through a programming parameter variable.
DEEPFREEZE (
+70°C
- -18°C )
Prepare
with
minus temperature the machine for the cooling. This
IS
TEMPERATURE
-
WORTH
through a programming parameter variable
STORAGE
Prepare the machine for the preserving of the foods.
If neither the cooling
press button
nor deepfreeze were pressed, the
machine works just the same as a normal refrigerator does, the
storage temperature can be prepared with regard to those ones for
that in the planned value (middle or small temperature) through
fitting keystroke (that in this connection Led lights up). If, however,
the cool course is prepared already through this keystroke only to
light up the
Led
of the temperature of the cool course preset
concerning that.
Heart sensor
Announce the temperature either in the cell or in the product heart. The lighting
up of the corresponding Led announces the chosen option.
TIME THAWING COURSE LED
Switch off the pin probe. At reached time end; that through
the parameter in this connection was prepared, one goes from
to the cooling to the storage/preserving about. The display gives
the still missing time to at the end of the cool course at Through
Keystroke "pin probe" becomes some seconds
t ake one of the two announced.
ON/OFF
The reversing gear turns on and from. The EWFC 1000 stands
always turnedly also in the eliminated state under tension
COMPRESSOR LED
Announces that the compressor in operation is. A possible flashing
shows the switch on - wait state at.
FAN ROTOR LED
Announces that the exhaust wheels in operation are. A possible
flashing shows the switch on - wait state at.
PIN LED
If at, the pin is turned on: if from, the pin is switched off since the
time circuit function was chosen. A flashing announces, that the pin
is in the wait state, meant a flashing after a certain space of time after
the start of the cooling course that the pin was not introduced in the
product and the control is Time Switched automatically.
THAWING COURSE LED
This system warning light announces, that the thawing course
became turned on.
PROGRAMMING LED
Flash during the programming onto.
ALARM LED
Led combined with alarm repetition exit. Near alarm probe
turned on.
• Functional references
During the device engagement becomes through
keystroke
that one
Requested selection of the desired
operation
. On the display the
information "SEL" appears and that following Led's
light up.
Cooling
Deepfreeze
Storage