background image

 

 

Page

Engagement the following 

operations

 through respective keystroke possible: 

 

1. Cooling  

(

+70°C/+3°C

Press button

 

Press button cycle start

 

 

2. Deepfreeze 

(

+70°C/

-18°C) 

Press button

 

Press button cycle start

 

 

3. Storage 

(+3°C) 

Press button

Led at 

Press button cycle start

 

 

4. Storage 

(-18°C) 

Press button

 Led at 

Press button cycle start

 

 

5. Cooling 

(

+70°C/+3°C

) s (

+3°C

Press button

+Button

 

Press button cycle start

 

 

6. Deepfreeze 

(

+70°C/

 18°C) s (-

18°C

Press button

+Button

 

Press button cycle start

 

 

Course of events manner

 

The food into the cell pursue pin probe into the middle of the product 
to be chilled insert. 
 
ON/OFF takes about the press 

button 

turning on On the display 
the 

SEL information appears 

and 

the following Led's to light up 

onto. 

 

Cooling   

Deepfreeze 

Storage 

 
There are three choices. 
 

Cooling in the product heart 
(advisable)

 

Pressing press button to 

cooling

 

(if after the cooling the foods 
) press button are supposed to be lain 
down 

Pressing storage

Cycle through START/STOP keystroke 
to turn on ON the display appears 
the one measured from the probe 
Temperature level. 

Deepfreeze in the product heart 
(advisable)

 

Pressing press button to deepfreeze

 

if after the deepfreeze the foods 
) storage press button are supposed to be lain down 

press.

 

Cycle through START/STOP keystroke 

turn on and on that  

Display appears to that of the probe 
measured temperature level. 
 
After the cooling and deepfreeze 
become in case of turned on storage 
the foods 

with

 a temperature level 

from 

+3C

 (after the cooling) or -18 C 

(after the deepfreeze) keeps. 
In Any Case appears on the display 
the respective temperature level of the cell. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SF 10 N















Reviews: