6 / 15
Nemo SX - Multifunction state module
Cat. N°:
SXMC02
5. GENERAL CHARACTERISTICS
Front face marking:
. By permanent ink pad printing (red line) and laser marking
Lateral side marking:
. By laser.
left side: Standard and programming information
right side: cabling and traceability information
5. GENERAL CHARACTERISTICS
(continued)
Signalling LEDs:
. Equipped with configurable signalling LEDs: red, yellow and green
(see § “Module configuration”):
-
LED turned on: indicates that the corresponding inputs is high
(contact cabled between the common terminal “C” and the
corresponding terminal “X1”, “X2”, or “X3” is closed)
-
LED turned off: indicates that the corresponding inputs is low
(contact cabled between the common terminal “C” and the
corresponding terminal “X1”, “X2”, or “X3” is open)
. Technology: non-replaceable LED lamps
. Life time 100 000 hours without maintenance.
. The ergonomic design of the translucent plastic window allows a
homogeneous projection of the light.
Multi-Functions button:
. Front face button as several functions:
. Gives information about the operating state on the module
Possible states:
Colour
State
Meaning
red
Slow blinking
Error (e.g. addressing error)
Fast blinking
No function
Steady
(pressing the
multifunction button
longer than 10 sec.)
Total reset
[any firmware updates are
preserved]
green
Slow blinking
System process is running.
Wait until the Led turns steady
Fast blinking
(pressing the
multifunction button
for 5 sec.)
put in “Stand
-
by” the Nemo SX
module (no remote action and
communication available)
Steady
System OK, connection is
running
orange
Slow blinking
Creation of a link with “Link
Functionality” procedure
(see
next §)
Fast blinking
Device’s firmware update in
progress
Steady
No function
Technical data sheet: IDP000169EN_04
Updated: 30/09/2020
Created: 31/08/2017
Electrical
diagram
LED linked to the input X2
Standards
Indicates the presence
of the addressing track-
wheel
DIP switches
configuration table
(extract)
Headquarter address
Wiring diagram
Traceability information
Data connection
with communication
rail
Data connection
with communication
patch cords
LED linked to the input X3
LED linked to the input X1
Cabling information
Label: to be removed
from the module and
kept if necessary
(module ID info ...)
