3 / 15
Nemo SX - Multifunction state module
Cat. N°:
SXMC02
4. PREPARATION
–
CONNECTION
(continued)
Connection with an associated device:
. Association with an electro-mechanical auxiliary c fault
signalling switch.
. Nemo SX multifunction state
module must be configured (locally or
remotely) as shown:
. Wiring diagram:
Note:
Open /Close / Tripped displayed information for a protection device.
With any kind of electrical protection device (modular or power) the
displayed information must be done in accordance with the handle
colour status, as shown below:
“I
-
ON” (red) = contacts closed
“O
-
OFF” (green) = contacts open
4. PREPARATION
–
CONNECTION
(continued)
Connection with an associated device
(continued)
:
. Association with several electro-mechanical faults signalling
auxiliaries.
. Nemo SX multifunction state
module must be configured (locally or
remotely) as shown:
. Wiring diagram:
. Association with an electro-mechanical Contactor or Latching relay
auxiliary contact.
. Nemo SX multifunction state
module must be configured (locally or
remotely) as shown:
. Wiring diagram:
Technical data sheet: IDP000169EN_04
Updated: 30/09/2020
Created: 31/08/2017
