Imagine neo adc-3981, Installation And Operation Manual

Page: 30 / 63

16 ADC-3981 Installation and Operation Manual
Chapter 2: Installation and Removal
2. If the affected module has not been discovered by your CCS
software application, enter the Build mode, and then drag or copy
and paste the module’s device icon from the catalog folder into the
Network or Discovery folder.
3. Right-click the device icon and then select Properties .
4. On the NRO or Device tab of the Navigation Properties box, enter
the IP address of the frame that holds the module. (See Figure 2-3 .)
Figure 2-3. Navigation Properties Box
5. In the last field, enter the slot number of the module, and then close
the window.
6. Double-click the device icon.
The Configuration... box opens. On the Software Upgrade tab,
the /slotx/boot (where x is the slot number) directory appears in the
Select the device directory to transfer to: field.
7. Click Add, and in the Add Upgrade Files box, browse and select
the boot folder in the module’s upgrade.
8. Click OK .
9. Select the file and then click OK .
10. Click Perform Transfer and then click Yes .
This may take several minutes.
11. Wait for the message File transfer to device succeeded in the
status bar.
Caution
Do not make changes in the
third field (located above and to
the right of the
Set Default
button.)
Do not make changes in
this field
Enter frame IP number here