Imagine neo adc-3981, Installation And Operation Manual

Page: 39 / 63

ADC-3981 Installation and Operation Manual 25
Chapter 3: Operation
FadeRate Fade Rate Controls the fading rate when channels are
swapped or muted 0 s to 10.0 s
(0.010 s*)
LockMode Lock Mode Sets the module working mode
• Delay*
• FreeRun
LckSource Lock Source Selects the reference source for the on-board
genlock circuitry
• DnStream
• DARS
• Card GL*
DARSPrsnt
[RO] DARS Signal Present Returns the presence of input DARS signal
• Yes
• No
DARSRefErr
[RO] DARS Reference
Error Returns the locking status of DARS input with
respect to external reference video signal
• Error
• No Error
• Not Valid
GlStdFb
[RO] Genlock Video
Standard Feedback Returns the detected external reference signal
standard
• PAL-B
• NTSC
GlVPrsnt
[RO] Genlock Video
Present Returns the presence of the video signal from
the external reference source
• Yes
• No
GlLocked
[RO] Genlock Locked Returns the locked status of the external
reference signal
• Not Locked
• Locked
• Not Valid
Ch1Peak,
Ch2Peak
[RO] Out Channel 1 Peak
Out Channel 2 Peak Indicates that channel 1to channel 2 is above
peak
• Yes
• No
Ch1Mut,
Ch2Mute
[RO] Out Channel 1 Mute
Out Channel 2 Mute Indicates that channel 1 to channel 2 is muted
• Yes
• No
DnBusEn Down Bus Enable Allows the passing of signals to downstream
card for concatenated function
• Yes
• No*
Fctry_Rcl Factory Recall Recalls factory default settings
• Yes
• No*
Setup Setup Parameters Sets the parameters for display and usability
(see
page 40 for a complete list of Setup
parameters and their factory default settings)
Various
Table 3-2. Operator and All List Parameters (Continued)
Card-Edge
ID
Parameter Name Function
User Range
or Options