Imagine communications CMN-91 Installation And Operation Manual Download Page 167 | Manualshive

Page: 167 / 195

background image

CMN-91

Appendix B

Installation and Operation Manual

Copyrights

© 2016 Imagine Communications Corp. Proprietary and Confidential.

Revision D | Page 167

Fabasoft R&D Software GmbH & Co. KG
Copyright Notice (BSD)

Copyright © Fabasoft R&D Software GmbH & Co. KG, 2003 [email protected]. Author: Bernhard Penz

Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:



Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.



Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the
distribution.



The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product
names may not be used to endorse or promote products derived from this software without specific
prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

The GNU v2 License

GNU General Public License

Version 2, June 1991

Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA. Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation's software and to any other program whose authors commit to

«
...
165
166
167
168
169
...
»

Summary of Contents for CMN-91




































































































































































































Reviews:

No comments

Related manuals for CMN-91

Brand: iHealth Pages: 14

Brand: iHealth Pages: 4

Brand: IEM Pages: 46

Brand: Tanaka Pages: 21

Brand: Samsung Pages: 41

Brand: AOC Pages: 93

Brand: Vision Pages: 3

Brand: WAGNER Pages: 2

Brand: Deco Gear Pages: 32

Brand: ViewSonic Pages: 66

Brand: AOC Pages: 61

MultiSync V554Q-R

Brand: NEC Pages: 76

Large Matrix Galaxy GT6X Series

Brand: Daktronics Pages: 33

Brand: AG Neovo Pages: 32

Brand: VETEC Pages: 16

Brand: Eizo Pages: 73

Brand: Clarion Pages: 33

Brand: Mimo Monitors Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands