Glass Plate Setup and Assembly Manual
Page 15
Note:
Because of the weight of the glass plate, the following assembling steps should
be done by two persons.
Lift up the glass plate to a position where it matches with the gas spring end. Hold it in this
position. The second person connects the gas springs to the ball-shaped heads by
pressings the parts together until they click in.
Picture 15: Gas spring assembled to mounting bracket
Picture 16: Setting the opening position
To adjust the glass plate to the desired
opening position, the mounting position of
the gas spring can be varied. While one
person holds the glass plate in place, the
second person opens the screws on both
gas spring brackets a little.
Then the glass plate can be adjusted to the
desired end position.
Finally the screws on the holder must be
securely
fastened.
