Page 12
Glass Plate Setup and Assembly Manual
A.4
Assembling the Glass Plate
Before assembling the glass plate to the Bookeye
®
3, it is necessary that the scanner is
fully set up and ready to use. That means
— the lamps are connected to the lamp connectors,
— the lamps are fastened to the rear panel,
— the cover has been moved over the main body element,
— all screws (eight screws on the rear panel, four screws on each bottom side, two
screws between the driving elements) are inserted and fastened,
— the book cradle plates are inserted into the driving elements.
Begin with two washers and the bearings. Picture 10 shows in which order the material
has to be placed on the mounting bracket.
Picture 10: Detail view of left mounting bracket with bearing
Start the Bookeye
®
3 scanner. When the display shows
READY TO SCAN
press and hold
the
CRADLES UP
key
to move both book cradle plates to the highest position.
