16
Image Vault
®
PRO Command
DVR Pigtail Internal Wiring
If you are utilizing the POS Interface feature, ensure that you have obtained the correct interface connector from Image Vault for the
approved device. Warning: You can harm the DVR by connecting a data device that is not approved by Image Vault and/or by using an
improperly constructed cable. If you manufacture your own cable, tap the POS device as follows:
•
Data (RX) at the POS printer tap goes to Pin 2 at the DVR.
•
POS ground goes to Pin 5 at the DVR.
•
At the DVR short Pins 7 and 8 together; short Pins 1, 4 and 6 together; leave Pins 3 and 9 open.
•
Wiring from the data source to journal printer depends on the device manufacturer.
IV-9 POS Wiring to 9-Pin Serial Printer
This diagram illustrates the proper wiring of the IV-9 pigtail kit used to capture data at serial printers with DB9 inputs.
IV-25 POS Wiring to 25-Pin Serial Printer
This diagram illustrates the proper wiring of the IV-25 pigtail kit used to capture data at serial printers with DB25 inputs.
