/
Manual
Page 79
Operation Info
D.1.2
In the section
Information
click the button Operation Info and the following list will show
various scan counters and elapsed times.
Picture 85: Operation Info screen
The following table gives a brief description.
Field
Description
Total Scan Count
The total number of scans performed since the scanner left
the factory. Each CCD scan cycle is counted, regardless of
it being a pre-scan or a full scan.
Total Power Up Cycles
The total number of power up cycles performed since the
scanner left the factory. Only the power-up cycles are
counted, which were invoked by the standby button.
Total Operating Time
The total operating time since the scanner left the factory.
This is the on-time only, standby time does not count.
Lamp Operating Time
The total lamp operating time since the scanner left the
factory.
Remaining Lamp Operating
Time
The typical remaining lifetime of the lamps. With normal
working conditions the lamp life is sufficient for the lifetime
of the device.
To return to the
USER
screen (Picture 82), click the button Back to Main Menu or click
on the “Return” button in your browser.
To return to the
Login
screen (Picture 81) click the button
Setup Menu
Click the button Launch Scan Application to switch directly to the main screen of the
integrated ScanWizard user interface.
