/
Manual
Page 5
About this Manual
Operation Manual
The
Operation Manual
gives all information about the normal operation and behavior of
the device. It is written for people who only operate the device and do not perform setup
and adjustment procedures. All device elements and software functions are described in
detail, although some of them might never be used. This manual does not cover any
application software. Refer to the appropriate application software manual to learn about
the application software.
Setup and Assembly Manual
The
Setup and Assembly Manual
is written for
technical staff with some basic
mechanical as well as software skills. Many resellers will offer on-site installation;
therefore, large parts or all of the setup and assembly manual might not be of interest to
the reader. The access level at which the setup and adjustment processes are performed
is called “Power user”. This “Power user” level is password protected from access by the
normal operator.
All manuals can be downloaded from our customer service portal at
. Be sure to always check for the latest versions of these
manuals.
This manual is divided into the sections A to F.
Section A
describes the hardware of the devices and gives an overview of all
components and connectors of the scanners. Remember that this device is
a precise optical instrument and should be handled accordingly.
Section B
describes the functions of the touchscreen and how to operate the scanner
with the touchscreen.
Section C
gives a short introduction and basic information about the new user
interface ScanWizard. All details about the interface can be found in the
integrated “Help” texts in the scanner.
Section D
informs about the setup levels in general and describes the access level
User
in detail.
Section E
describes test and troubleshooting procedures.
Section F
contains all technical data of the scanner and the manufacturer
declarations concerning safety and electromagnetic compatibility (EMC).
