G P I B / I E E E 4 8 8 . 2 R E M O T E O P E R A T I O N
Common Commands and Queries
34
OMM-6810B
C H A P T E R
3
The DISABLE LISTENER FUNCTION command is used to force the device to cease
being a listener.
The STANDARD EVENT STATUS ENABLE command is used to load the STandard
Event Status Enable Register. The Standard Event Status Enable Register is logically
ANDed to the Standard Event Register (see Figure 3.9). If the result is non-zero then the
Event Summary Bit (bit #5) in the Status Byte is set to one. The *ESE command is useful
for assigning which events are capable of generating an SRQ.
-
where, the <integer nrf> is the binary integer sum of the enabled bits in Figure 3.9. The
value must be between 0 and 255.
*DLF
*ESE
:
*
DLF
:
*
ESE
<white
space>
nrf>
<integer
