S A F E T Y S Y M B O L S
viii
OMH-6727B
S
AFETY
S
YMBOLS
This section describes the safety symbols and classifications.
Technical specifications including electrical ratings and weight are included within
the manual. See the Table of Contents to locate the specifications and other
product information. The following classifications are standard across all ILX
Lightwave products:
•
Indoor use only
•
Ordinary Protection: This product is NOT protected against the harmful ingress of moisture.
•
Class I Equipment (grounded type)
•
Mains supply voltage fluctuations are not to exceed ±10% of the nominal supply voltage.
•
Pollution Degree II
•
Installation (overvoltage) Category II for transient overvoltages
•
Maximum Relative Humidity: <80% RH, non-condensing
•
Operating temperature range of 0 °C to 40 °C
•
Storage and transportation temperature of –40 °C to 70 °C
•
Maximum altitude: 3000 m (9843 ft.)
•
This equipment is suitable for continuous operation.
Safety Marking Symbols
This section provides a description of the safety marking symbols that appear on
the instrument. These symbols provide information about potentially dangerous
situations which can result in death, injury, or damage to the instrument and other
components.
Caution,
refer to
manual
Earth
ground
Terminal
Alternating
current
Visible and/or
invisible laser
radiation
Caution, risk
of electric
shock
Protective
Conductor
Terminal
Caution, hot
surface
Frame or
chassis
Terminal
On: In position of a bistable push control.
The slash (I) only denotes that mains are on.
Off: Out position of a bistable push control.
The circle (O) only denotes that mains are off.
or
(I)
or
(O)
