C O M M A N D R E F E R E N C E
Error Messages
4_03
OMH-6727B
17
C H A P T E R
3
Table 3.1
Device-Dependent Commands valid with the OMH-6727B
POWer:REFerence
2
Sets the reference for
∆
P measurements
POWer:REFerence?
None
Returns the power reference level
PREselect:CHAN
1
Selects on of four preselected wavelengths
PREselect:CHAN?
None
Returns the preselected wavelength channel
being used
PREselect:SAVE
2
Sets one of the four preselected wavelengths
RANge
1
Sets the gain range (manual)
RANge?
None
Returns the gain range (auto/manual)
RANge:AUTO
1
Sets the autoranging mode on or off
RANge:AUTO?
None
Returns the status of the autoranging
RATE
1
Sets the measurement rate
RATE?
None
Returns the measurement rate string
SECURE
1
Used by service personnel to access PUB
TERM
1
Sets the program message terminator
TERM?
1
Returns the program message terminator
TIME?
None
Returns elapsed time since power up
TIMER?
None
Returns elapsed time since last TIMER?
WAVE
2
Sets the wavelength
WAVE?
None
Returns the set wavelength
WAVE:AUTO
1
Sets the auto wavelength feature on or off
1
WAVE:AUTO?
None
Returns the status of auto wavelength
1
WAVE:MODE
1
Sets the wavelength display units
WAVE:MODE?
None
Returns the wavelength display units
WAVE:OFFSET
2
Sets the wavelength offset
WAVE:OFFSET?
None
Returns the wavelength offset
WAVE:REFerence
2
Sets the reference for
∆
λ
WAVE:REFerence?
None
Returns the wavelength reference point
ZERO
None
Starts the zeroing function
ZERO?
None
Returns the status of the zeroing.
