I N T R O D U C T I O N A N D S P E C I F I C A T I O N S
Specifications
4
OMH-6727B
C H A P T E R
1
1. Add + 0.5% from 1500 to 1630 nm.
2. Minimum optical power required for accurate wavelength measurement:
950 nm ~ 1200 nm
150 uW (-8.2 dBm)
1200 nm ~ 1630 nm
10 uW (-20 dBm)
3. MANUAL wavelength mode: Add +0.5% for automatic wavelength correction.
4. 1630 to 1650 nm: MANUAL wavelength mode only.
Our goal is to design and produce the best optical test equipment available
anywhere. To achieve this, we need your ideas and comments on ways we can
improve out products. We invite you to contact us at any time with your
suggestions.
Right Display (Wavelength)
Units
Range
Resolution
nm, cm
-1
,
∆
λ
500.0 to 1000.0 nm, 20,000 to 10,000 cm
-1
.1 nm, .1 cm
-1
Right Display (Wavelength)
Bargraph
Percent of full scale power
Brightness
5 settings
General Specifications
Operating Temperature
+ 15
o
C to +35
o
C
Storage Temperature
-40
o
C to +70
o
C
Humidity (non-condensing)
> 100
µ
W: <85% RH
< 100
µ
W: <70% RH
Overall Dimensions
68.6 mm diameter x 30.1 mm
Weight <
0.5
kg
Input Port Diameter
6 mm
Input Type
Integrating sphere
Optical Stand Accommodations
8/32 tapped hole centered
Fiber Optic Adapter
FC, SC, ST
Connector to Main Unit
26 pin high-density sub-D
