C O M M A N D R E F E R E N C E
Command Reference
7/01
LDC-3700 Series
99
C H A P T E R
4
The TEC:ENABle:EVEnt command sets the status event enable register of the TEC operations.
These events are summarized in bit 0 of the status byte register.
Parameters
An <nrf value> whose sum represents the enabled bits:
Notes
The enabled TEC events can be read by using the TEC:ENABle:EVEnt? query.
The enabled TEC event status can be monitored by the TEC:EVEnt? query.
The enable registers normally retain their values at power−up (as they were at power−down) unless
the power−on status clear flag is set true (see *PSC, Chapter 3).
Examples
"Tec:Enab:EVENT 160" −action: enables the TEC status event register so that the TE Module Open
and Booster Changed conditions will be reported (in summarized form) to the status byte register
(bit 1).
"Tec:Enable:EVEnt #H0EFB" −action: enables the TEC status event register so that any and all of
the above events will be reported (in summarized form) to the status byte register (bit 1).
The TEC:ENABle:EVEnt? query returns the value of the status event enable register of the TEC operations
Notes
The enabled TEC events can be set by using the TEC:ENABle:EVEnt command.
The TEC event status can be read and reset by issuing the TEC:EVEnt? query.
Examples
"TEC:ENAB:EVE?" −response: 520, means that the High Temperature Limit and Output Out of
Tolerance TEC events will be reported (in summarized form) to the status byte register (bit 0).
"Radix Hex; TEC:Enab:Eve?" −response: #H0EFB, means that all of the above events will be
reported (in summarized form) to the status byte register (bit 0).
TEC:ENABle:EVEnt
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
1 − TE Current Limit
256 − N/A
2 − Voltage Limit Error
512 − Output Changed to be In/Out of
Tolerance
4 − N/A
1024 − Output On/Off Changed
8 − High Temperature Limit
2048 − New Measurements Taken
16 − TEC Interlock Disabled
4096 − N/A
32 − Booster Enable
8192 − N/A
64 − Sensor Open
16384 − N/A
128 − TE Module Open
32768 − N/A
TEC:ENABle:EVEnt?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
1 − TE Current Limit
256 − N/A
2 − Voltage Limit Error
512 − Output Changed to be In/Out of
Tolerance
4 − N/A
1024 − Output On/Off Changed
8 − High Temperature Limit
2048 − New Measurements Taken
16 − TEC Interlock Disabled
4096 − N/A
32 − Booster Enable
8192 − N/A
64 − Sensor Open
16384 − N/A
128 − TE Module Open
32768 − N/A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com