manualshive.com logo in svg

ILX Lightwave LDC-3700B Series, User Manual, Page: 110 / 152

Share
Download
ILX Lightwave LDC-3700B Series User Manual Download Page 110

C O M M A N D   R E F E R E N C E

Command Reference

7/01

LDC-3700 Series

 95

 

C H A P T E R  

4

The TEC:CONST? query returns the value of the TEC’s Steinhart−Hart constants or the linear 
sensor conversion constants.

Notes

The response is always in the form: C1, C2, C3.
When the LM335 or AD590 sensors are selected via the SENSOR SELECT switch, only C1 and C2 
are used. Therefore, C3 values may be ignored for these cases. 

Examples

"TEC:CONST?"   −response: 1.111,2.03,0.85 means C1 = 1.111, C2 = 2.030, and C3 = 0.850.
"TEC:Const?"    −response: 1.00,2.222,0.07 means C1 = 1.000, C2 = 2.222, and C3 = 0.070.

The TEC:DISplay command enables or disables (turns off) the TEC display and TEC section’s 
indicator LEDs.

Parameters

An <nrf value>; 1 = on, 0 = off. 

Notes

Turning the TEC display and LEDs off means that a message of all blank spaces is sent to the TEC 
display, and all of the TEC section’s indicator LEDs will be turned off.

Examples

"TEC:DIS 0"  −action: the TEC display will be blanked, and all of the TEC indicator LEDs will be 
turned off.
"tec:dis 1"  −action: the TEC display and LEDs will be enabled.
"tec:display on"  −action: the TEC display and LEDs will be enabled.

The TEC:DISplay? query returns the contents of the TEC display.

Notes

Returns the actual (6−character) string from the output buffer to the TEC display. If the display is 
disabled, it returns " .".

Examples

"TEC:DIS?"  −response: "− 99.9", means "− 99.9" is on the TEC display.
"Tec:DISp?"  −response: "   0.6", means "   0.6" is on the TEC display.

The TEC:DISplay:ITE command enables the TEC display to show the TE current measurement.

Parameters

None.

Notes

The actual TEC ITE display is turned off automatically when another TEC display selection is 
enabled.

Examples

":Tec:Display:Ite"  −action: enables the TEC display for measured current values. 
"TEC:DIS:ITE"  −action: enables the TEC display for measured current values.

TEC:CONST?

C

OMMON

D

EVICE

 D

EPENDENT

F

RONT

 P

ANEL

TEC:DISplay

C

OMMON

D

EVICE

 D

EPENDENT

F

RONT

 P

ANEL

TEC:DISplay?

C

OMMON

D

EVICE

 D

EPENDENT

F

RONT

 P

ANEL

TEC:DISplay:ITE

C

OMMON

D

EVICE

 D

EPENDENT

F

RONT

 P

ANEL

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for LDC-3700B Series

























































































































































Reviews:

No comments