ILVE H SERIES Operating & Installation Manual Download Page 11

Page: 11 / 53

IMPORTANT

SAFETY WARNINGS

19.

Never leave the hotplate switched on without a pan on

it, otherwise it will reach a very high temperature quickly

and the cooker or furniture in the vicinity could be damaged.

20.

Some parts of the cooker, especially the electric hotpla-

tes, stay warm for a long time after use. Be careful not to

touch them.

21.

Do not keep below the cooker and do not use inflam

mable liquids (detergents, sprays, alcohol, petrol ...) near

the cooker when it is switched on.

22. If using small electric appliances near the hob, be sure

to prevent the electric cable from touching the appliance’s

hot parts.

23.

In order to work properly, gas cookers must be installed in well

ventilated premises. Ensure that installation is carried out accor-

ding to the indications given in the “Installation” chapter.

24.

The materials used in the construction of our electri-

cal appliance are compatible with the environment and the-

refore recyclable. Packaging remains should not be left within the

reach of children, but disposed of using specific recycling channels.

The possibility of disposing of your equipment through your local

retailer and/or town council should be investigated; remember to

make your appliance unusable before scrapping it.

25.

In case the tap is hard or precarious to turn, do not intervene

on the tap but shut off the gas and have the authorised service

centre intervene.

26.

Do not modify or change the cooker.

Summary of Contents for H SERIES






















































Search results

Summary of Contents for H SERIES

Reviews:

Related manuals for H SERIES

Brands by name

Popular brands

ILVE H SERIES, Operating & Installation Manual

Search results

Summary of Contents for H SERIES

Reviews:

Related manuals for H SERIES

Brands by name

Popular brands