3) Install mortise lock on the door (ensure other secure locks/hooks are installed
depending on the type of door used)
4) Install cylinder onto outer body and secure it with screws
5) Attach handle spindle on mortise lock (take notice of installation direction); install the
guideposts on outer body, insert the power wire of outer body through the top hole of
door, and correctly install the handle and rest of the outer body parts to the
corresponding holes
6) Assemble the mounting plate and gasket together, securely tighten the mounting plate
and outer body together on the door
7) Connect power wires of inner body, outer body and mortise lock together; install handle
spindle correctly with handle, as well as with other stud, to the corresponding holes; then
tighten it up with 4 screws
8) Insert 4 AA dry cells on battery compartment, using screws to close the battery cover
9) Installation is now Qinished. Carefully test all function and operation using Qingerprint, IC
card, PIN and mechanical key.
2.4 Instruction
2.4.1
Initialization
：
Verify purchased product → install correctly → change administration
PIN → register Qingerprint and PIN → able to access
2.4.2 To lock
：
From
Outside
：
① Close the door → lift the outer handle → door has been locked
；
From Inside
：
① Close the door → lift the inner handle → door has been locked
；
②
turn the deadbolt knob → door has been double-locked
；
2.4.3
To unlock
：
From Outside
：
① Enter PIN/scan Qingerprint → complete veriQication → turn handle
and open → door has been unlocked
；
② Open cylinder cover → manually unlock
using keys.
From Inside
：
① turn handle and open the door → door has been unlocked
；
② turn
the deadbolt knob to unlock → door has been unlocked
；
TEL+86 136 6220 0318
Email: [email protected]
Ilockey Technology Co.,lTD
Focused on intelligent lock solution
