© 6/2016 Ilmor Marine Engines, Version 1.0
4-13
MAINTENANCE
1. Remove the oil reservoir from the bracket (
Figure 4-9, 1
).
1
2
Figure 4-9
2. Empty the contents into a container large enough to hold the drained
gear oil.
3. Install the oil reservoir (
Figure 4-9, 2
) in the bracket.
4. Place the stern-drive in full trim limit OUT position.
5. Remove the oil fill/drain plug (
Figure 4-10, 1
) and gasket (
Figure 4-10, 2
).
6. Drain the oil.
2
1
Figure 4-10
7. Remove the oil vent plug (
Figure 4-11, 1
) and gasket (
Figure 4-11, 2
).
Allow the oil to drain completely.
1
2
Figure 4-11
