SECTION 1
ILMOR ONE-DRIVE OWNER’S MANUAL
1-6
© 6/2016 Ilmor Marine Engines, Version 1.0
NOTICE: Never attempt to modify the stern-drive’s design or safety
features.
Failure to comply may impair the stern-drive’s safety and performance
characteristics and shorten the stern-drive’s life. Any alterations to this
stern-drive may affect the warranty coverage of your stern-drive.
NOTICE: Never use the stern-drive lifting eye to lift the engine and
stern-drive as an assembly. Use the engine lifting eyes to lift the engine
and stern-drive. Only use the stern-drive lifting eye to lift the stern-drive
as a separate component.
NOTICE: The anode of the stern-drive is only calculated for the stern-
drive. Changing the material of the propeller may require additional
anodes to be installed on the stern-drive.
NOTICE: Anytime the boat is left in the water and the engine is not
running, the drive must be left in the fully down position. This will keep
the anodes in the water and will keep the exhaust pipe engaged with
the exhaust port of the drive.
