SECTION 4
ILMOR ONE-DRIVE OWNER’S MANUAL
4-12
© 6/2016 Ilmor Marine Engines, Version 1.0
Minimum 40 mm
(1-1/2 in.) of
unpainted area
around transom
assembly
Painted
vessel
transom
Figure 4-8
NOTICE: The drive unit and transom assembly can be painted with a
good quality marine paint or an anti-fouling paint that does not contain
copper or any other material that could conduct electrical current.
Never paint drain holes, anodes, I-CaPS or items specified by the
vessel manufacturer.
NOTICE: Never wash the stern-drive with a power washer because it
can damage the coating on the reference wire and increase corrosion.
Retorquing the Rear Engine Mounts
See Torquing the Rear Engine Mount Bolts on page 4-17.
Changing the Stern-Drive Oil
NOTE: The stern-drive oil must be changed every 150 hours or every year,
whichever comes first.
NOTICE: Always be environmentally responsible.
Follow the guidelines of the EPA or other governmental agencies for the
proper disposal of hazardous materials such as lubrication oil, diesel
fuel and engine coolant. Consult the local authorities or reclamation
facility.
