REVEXmax - User’s Manual
7
Additional information
Warning concerning a DUT isolated placing
Symbol (Figure 18) highlights the fact that all conductive parts must be isolated
from accidental grounding.
Figure 18: Warning concerning a DUT isolated placing
Warning concerning heating the internal circuit when Rpe is measured
When low Rpe values are measured, it may overheat the internal circuit of the
REVEXmax. We recommend performing the measurements for a max. of 30 secs.
(only for value <10.00 Ω). If the temperature inside exceeds the allowed limit, the
symbol (Figure 19) is displayed and the acoustic signal sounds.
Figure 19: Warning concerning heating the internal circuit when Rpe is measured
c
2019 ILLKO, s.r.o.
Page 51
