ResMark 5000 High-Resolution
Section 1: Safety and Ink Usage
400386 Operations Manual Rev A
Page 6
Section 1: Safety and Ink Usage
Following is a list of safety symbols and their meanings, which are found throughout this manual. Pay attention to these symbols where they
appear in the manual.
Wear safety goggles when performing the procedure described!
Caution or Warning! Denotes possible personal injury and/or damage to the equipment.
Caution or Warning! Denotes possible personal injury and/or equipment damage due to electrical hazard.
NOTE:
(Will be followed by a brief comment or explanation.)
CAUTION:
The Ink Supply Module contains hazardous voltage (90VDC). Disconnect from mains power before:
•
Performing preventive maintenance.
•
Performing any repairs to the unit.
•
Servicing the equipment in any manner.
ESD protection should be worn when servicing internal printed circuit boards.
After service to the equipment is completed, replace all protective devices such as grounding cables and covers before operating the equipment.
It is extremely important to:
•
Clean up all spills and dispose of all waste according to local and state regulations.
•
Wear safety glasses and protective clothing, including gloves, when handling all inks and conditioners.
•
Store inks and conditioners under the recommended conditions found on the SDS (Safety Data Sheet).
Service is to be performed by trained or ITW personnel only.
Caution: Denotes possible personal injury due to sharp object.
