ResMark 5000 High-Resolution
Section 2: Quick Start
400386 Operations Manual Rev A
Page 17
Step 10: Daisy-Chain Print Heads, HMI, and/or Customer Network
1. Install secondary print heads as shown in the previous steps.
2. Secondary print heads should be connected between the upstream print head Ethernet out port to the input port
on its print head as shown as shown in the diagrams below. Up to eight print heads can be daisy chained
together.
3. Install the HMI / Controller on appropriate bracketry.
4. Connect the HMI or Laptop / PC via Ethernet cable (400374-2.0) as shown in the below diagrams.
NOTE:
Alternatively, the Primary print head can be connected to the HMI via wireless. Consult the create and control
manual (400463).
Standalone System with HMI - One Print Head
Standalone System with HMI - Two or More Print Heads
OPTIONAL
HMI
FROM UPSTREAM
PRINT HEAD
TO DOWNSTREAM
PRINT HEAD OR HMI
HMI
PRIMARY PRINT HEAD
HMI
SECONDARY PRINT HEAD
PRIMARY PRINT HEAD
SECONDARY PRINT HEAD
