ICWFV428-2055-01-IB.indd 10
10/05/2018 11:15:33 AM
SETUP
4. Connect to Wi-Fi
To use the clock’s Wi-Fi features, the clock and your mobile device must both be
connected to a Wi-Fi network. The app will guide you through the process, just
follow the on-screen instructions and have your network password ready.
After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below.
Initial Wi-Fi Connection
Note: If you have a dual band wireless router, be sure to connect to the 2.4GHz
band, not the 5GHz band.
Note: Please make sure that the WPS indicator is On when Wi-Fi connected.
1.
Press the
Power
button to power on the clock.
The Mode/Connection LED
will flash multiple colors after first powering on.
This is normal, please
wait for the Mode/Connection LED to begin slowly flashing white, indicating the
speaker is in Wi-Fi Standby Mode.
2.
Open the
iLive Wi-Fi
app on your device and press “Search”, then “Add Device”
(Image A, B, below).
A.
B.
10
