ICWFV428-2055-01-IB.indd 3
10/05/2018 11:15:31 AM
SAFETY WARNINGS
•
WARNING: To prevent fire or shock
hazards, do not expose this unit to rain
or moisture.
•
Clean only with a dry cloth. Do not clean
with liquid cleaners or damp cloth.
•
Do not use with devices that should not be
used unsupervised.
•
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, USE ONLY INDOORS.
•
Do not use in a bathroom or other location
where it may come into contact with water
or splashing.
•
WARNING: Where the mains plug
or appliance coupler is used as the
disconnect device, such disconnect
device shall remain readily operable.
•
Risk of electric shock. Grounding
continuity must be maintained.
•
Only use the included power supply or a
UL/ETL certified power supply of the same
power output specifications.
WARNING:
This product can
expose you to chemicals including
lead, which is known to the State of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to: www.
P65Warnings.ca.gov This product
meets and complies with all Federal
regulations.
FCC WARNINGS
WARNING: To assure continued operation,
follow the attached installation instructions and
use only shield cables when connecting to
other devices. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
WARNING:
This equipment complies with
FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
minimum distance 20cm between the radiator
& your body.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for help.
3
