ILGI TXS 20, Users Manual & Spare Parts List

Page: 8 / 30

8
1.4 Safety rules during working
Before Working

Read carefully all instructions if you’re going to use the machine for the first time. Refer to
manufacturer company for the matters if you have any suspect.

The valid rules for safety and protecting against accidents of vocational chambers must be
taken into consideration right alongside the instructions of this user manual that belongs to
the machine.

Use appropriate working clothes. Never use hanging clothes. These clothes can be caught by
turning and moving machine parts.

Be careful to lift the machine balanced from indicated points on the machine during
transporting the machine to another place.

Ensure that the person who will operate the tractor which the machine is mounted on must
have a driver license, must be an experienced and trained driver.

Be sure that there aren’t other people especially children and pets around the machine before
operating the machine, the tractor. Take necessary measures in order to see the environment
easily.

The exhaust gas is poisonous. Therefore the tractor shouldn’t be operated in inconvenient
and closed areas.

Front and rear weights for the tractor must be mounted if necessary in the event of any
equipment to be installed on the tractor.

Ensure that the system isn’t under pressure before detaching hydraulic hoses and pipes.

An oil leakage that is under pressure may be dangerous. Shield, protective goggles and
gloves must be worn while searching the leakages in order to prevent serious injuries. The
oil pressure must be reduced before starting to work with hydraulic system. Ensure that the
hydraulic hoses are fastened to proper outputs.

Please note that the machine mounted on the tractor will change some functions (brake
distance, steering wheel control, center of gravity) of the tractor.

Pressure of the wheels must be checked before outgoing.

Mount your machine to a tractor which has an appropriate pulling and hydraulically lifting
system.

Apply the parking brake and shift the gear into neutral of the tractor before mounting the
machine on the tractor.

Ensure that there is nobody between the machine and the tractor during the machine is being
mounted on and detached from the tractor.

Start to work with your machine and tractor after all safety measures are taken.

Special pulling pins must be used while mounting the machine to the tractor; those can
endure machine strength and have appropriate thickness.

Waste materials such as nylon, clothe and obstacles such as tree roots must be cleaned,
obstacles (irrigation sets etc.) in the field must be smoothed.

Never operate in fields with plenty of stones.

Be careful for the operating area of hydraulic lifting wings. There is a risk of crushing and
squeezing.

It is necessary to be sure about all systems and operating components as well as their
functions before starting to work.

Moving direction of the machine parts which operates hydraulically or by spring force must
be taken into account. There is a risk of striking, crushing and squeezing.

All adjustments explained in the machine manual must be set before starting to operation.