ILGI TXS 20, Users Manual & Spare Parts List

Page: 12 / 30

12
3. USAGE INFORMATION AND ADJUSTMENTS
3.1 Machinery tractor compliance
The tractor and the machine should be;

Connecting rods measuring compliance must be (2. Or 3. Category).

Tractor front rear load balance must be provided for suspended type machinery. Additional
weight must be put in front of the tractor if the tractor rearing up in case of removing the
machine.
Select a Texas model appropriate with the power of your tractor. Ensure the equipment – tractor
weight balance with tractor front weights.
Otherwise your driving safety will be risky, you can’t utilize entirely tow-power of your tractor.
Tractor upper connecting rods direction must be towards about tractor transmission, machinery upper
connecting alternative holes must be used if ( A ) direction is not suitable. FIGURE 3
G 2 WEIGHT TOGETHER WITH G 1 WEIGHT MUST CREATE SCALES BALANCE
And FRONT WEIGHT BALANCE MUST BE OVER BY 10-20%
G2 WEIGHT AMOUNT THAT WILL BE USED IN THE FRONT MUST BE DETERMINED
ACCORDING TO THIS
AFTERWARDS THIS WEIGHT MUST BE ATTACHED
Figure 3