transport clamps of the spool. The cutting head is now
ready for operation.
Trouble Shooting
•
Tool does not work:
Check power supply (e.g. by
testing on another socket or by means of a voltage
tester). Should it still not work, although the socket
is o.k., send it undismantled to an authorised service
station for repair.
•
Cutting line disappears into spool:
Remove spool
(acc. to point
“How to Replace the Line Spool”
), pull
end of line through the metal outlet and reinsert spool.
In case nylon line is used up insert a new spool with
line.
Do not make any other repairs on your own; have your tool
checked and repaired by an authorised service station.
Storing
• Clean the unit thoroughly, especially the cooling air
slots on the motor housing.
• Do not use water to clean the device.
• Store trimmer indoors in a dry, high or locked place and
keep out of reach of children.
Waste disposal and environmental protection
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/re-
cycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
Repair saervice
Repairs to electric power tools should only be carried out
by a specialised electrician.
GB-4
Summary of Contents for ESN 1000Y
Page 3: ...3 1 2 3 4 5 6 7 8 A B ...
Page 20: ......
