4. KITE SETUP
4.1 CONNECTING THE LINES
Separate the bridle system:
Be sure that there are no tangles in the bridle system. Lay the bridles system on the ground with
the front connection inside and back connection outside.
CONNECT
Unwind your lines from your bar laying them out parallel to each other making sure to remove
all twist starting from the bar.
You will notice that the line ends are colored. Each line end is colored and labelled so it’s hard to
make connection mistake. Please make sure you connect the lines well.
Its always better to check twice and act once!! If things are connected wrong the kite can
respond improperly when launched which can be very dangerous.
Do the connection with a larks head knot.
WIND
26
27
