4. KITE SETUP
4.1 LOCKING THE ONE PUMP VALVE
After your kite is pumped, lock the one pump valve on each strut to separate the inflated area in
case of leak. This is safer for you and your gear. Turn your kite with bladers face to the ground
and trailing edge face to the wind and secure it with sand or board (becareful with the fins).
4. KITE SETUP
4.1 PUMPING THE KITE
Unscrew the top of the valve. Plug one of the fitting (coming in the kite bag) then pump the kite
with a proper pressure ( 7 psi recommended). Remove the plug, tighen the middle part of the
valve, srew the cap on and put the velcro cover over.
24
25