HDMI
Diagram C
Push Camera and
Mounting Tray all the
way
forward
into
Mounting Plate
STEP 4 - Install Camera/Hotshoe in Housing -
continued
Port Base
Port Base O-ring
11
Hotshoe - push all
the way
forward
into camera mount
6. Slide the Hotshoe into the top camera mount until it stops. Hotshoe must
be all the way forward in the camera mount to assure a good electrical
connection with a strobe,
Diagram C, below
.
Make sure hotshoe cord does not interfere with controls or the housing
back when closing the housing.
7. When using the Fiber Optic Ports, RAISE the camera flash. Make sure
the flash is pointing forward before closing the housing.
Mounting Plate
