7
Skip STEP 1 if Tray and Spacer are factory installed.
One side of the Spacer has an adhesive backing. Remove the Protective
Film to adhere the Spacer to the Tray.
Using a 9/16” open/box end or socket Wrench
(not supplied)
, firmly
tighten the External Tray and Spacer to the Mounting Bolts using the two
3/8-16 Nuts and Washers supplied in the accessory package. Reverse
procedure to remove.
Note:
Tray and Handle may be attached before or
after the camera is secured in the Housing. We recommend attaching
them immediately to avoid scratching table tops with the Mounting Bolts.
3/8-16 Nut
9/16” Wrench -
not supplied
MADE IN USA
Tray Mounting Bolt
External Tray
& Handle
Spacer
Protective Film
STEP 1 - Attach/Remove Tray and Handle
Washer
HOUSING and CAMERA SETUP STEPS
Adhere Spacer to Tray
before attachment to
Housing.
