Ikegami VFL701A, Operation Manual

Page: 29 / 54

㻌
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 E- 21
(5) VF MENU (5/10) PEAKING
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
㻌
ձ ձ PEAKING
Sets up ON/OFF of PEAKING function.
The default value is
䇾 ON 䇿 .
*
Setting [PEAKING] on a FUNCTION switch will enable
ON/OFF switchover of PEAKING.
㻌
ղ
PEAKING MODE
This sets the directions of the Peaking edge.
“H&V”: The Peaking edges are added to both the horizontal
and vertical direction.
“H-ONLY”: The Peaking edges are added to the horizontal
direction only.
When the setting is “H&V”, the peaking edge flicker may be
found in the moving picture. In this case, this phenomenon
will be improved by changing the setting to “H-ONLY”.
The default value is
䇾 H&V 䇿 .
ճ
PEAK WIDTH
Sets up the edge width of Peaking when Peaking is
䇾
ON
䇿
.
The setting value is a value between
䇾
1
䇿
(thin) and
䇾
4
䇿
(thick).
The default value is
䇾 1 䇿 . 㻌
㻌
մ
NOISE SUP (NOISE SUPPRESS)
Sets up the Coring Level of Peaking when Peaking is 䇾 ON 䇿 .
This is a function for cutting off the weak edges below the
specified threshold value in the edge elements of images. In
other words, this function eliminates the edge elements at-
tached to the noise elements in images, allowing a clearer
peaking to be realized.
It should be remembered, however, that some weak elements
normally attached to the image elements will also be cut off.
The setting value is a value between
䇾 0 䇿 and 䇾 9 䇿 .
The default value is 䇾 5 䇿 .
㻌
㻌
㻌
㻌
* Setting [NOISESUP] on a FUNCTION switch will enable
switching of the Coring Level between
䇾
0
䇿
and
䇾
9
䇿
.
㻌
* When the peaking color is set to a color other than “White”
in
䐤
, the NOISE SUP function does not work. The char-
acteristic becomes the same as the set value “0”.
㻌
㻌
յ PEAKING UP
When Peaking is 䇾 ON 䇿 , sets up the magnification of the
Peaking Level according to the differences in brightness.
By increasing the magnification, it will become easier for
peaking to attach to those portions that are difficult for edges
to attach because of a small difference in brightness.
In this case, however, peaking will attach even to the noise
elements in the image. Therefore, a clear peaking can be real-
ized by using this feature in conjunction with the preceding
feature described under
մ
NOISE SUP.
The setting values that can be selected are
䇾
×1
䇿
(OFF),
䇾
×2
䇿
,
䇾
×4
䇿
, and
䇾
×8
䇿
.
The default value is “×1” (OFF).
*Setting [PEAK-UP] on a FUNCTION switch will enable
switching of the Peaking Magnification.
ࠉࠉࠉ㸨㸨㸨㸨ࠉ㹔㹄ࠉ㹋㹃㹌㹓㸦㸳㸭㸯㸮㸧ࠉ㸨㸨㸨㸨
ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹎㹃㸿㹉㹇㹌㹅
ࠉЋ㸦㹎㸿㹅㹃㸧Ѝ
ࠉ㸯㸬㹎㹃㸿㹉㹇㹌㹅ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㹍㹌
ࠉࠉࠉЍ㹎㹃㸿㹉㹇㹌㹅ࠉ㹋㹍㹂㹃ࠉࠉࠉࠉ㹆㸤㹔
ࠉࠉࠉЍ㹎㹃㸿㹉㹇㹌㹅ࠉ㹕㹇㹂㹒㹆ࠉࠉࠉ㸯
ࠉࠉࠉЍ㹌㹍㹇㹑㹃ࠉ㹑㹓㹎㸬ࠉࠉࠉࠉࠉࠉ㸳
ࠉࠉࠉЍ㹎㹃㸿㹉㹇㹌㹅ࠉ㹓㹎ࠉࠉࠉࠉࠉࠉ㹖㸯㸦㹍㹄㹄㸧
ࠉࠉࠉЍ㹁㹍㹊㹍㹐ࠉ㹎㹃㸿㹉㹇㹌㹅ࠉࠉࠉڦ
ࠉ㸰㸬㹘㹍㹍㹋ࠉ㹓㹎ࠉ㹎㹃㸿㹉㹇㹌㹅ࠉࠉ㹍㹄㹄
ࠉࠉࠉЍ㹘㹍㹍㹋㹓㹎ࠉ㹎㹃㸿㹉ࠉ㹋㸿㹖ࠉ㸯㸮㸮
ࠉࠉࠉЍ㹘㹍㹍㹋㹓㹎ࠉ㹎㹃㸿㹉ࠉ㹋㹇㹌ࠉ㸮
ࠉ
ࠉ㹃㹖㹇㹒
䐟㻌
䐠㻌
䐡㻌
䐢㻌
䐣㻌
䐤㻌
䐥㻌
䐦㻌
䐧㻌
Coring Level
Coring Level
Edges below the Coring Level will be cut off.