Ikegami VFL701A, Operation Manual

Page: 10 / 54

㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 E- 2
or through the automatic operation (the switchover time to
be specified on the MENU) for detailed comparisons and
adjustments including location alignment and color adjust-
ments at the shooting site through the use of only this view-
finder unit.
Since the captured image can be stored on a USB memory
or be downloaded to the viewfinder unit, it is possible to re-
produce the image at the same view angle. The data (*) can
also be used on another VFL701A unit.
* An exclusive file format is used.
(11) Using the unit as a monitor
Since the product provides facilities for HD/3G-SDI input
and DC input, it is possible to use the unit not only as a
viewfinder but also as a VF for jib camera or as a monitor
single-handedly. The R/G/Y tally control is possible through
the contact points of VF cable.
(12) Picture in Picture
In addition to the picture of the camera, the picture of SDI
INPUT can be displayed simultaneously as the sub-screen
(or in the reverse).
(13) Peaking function
When there are some difference of the luminance signal
component between the neighboring pixels, this function
emphasizes that luminance difference (edge compo-
nent).When the focusing is correct, the visibility of image
will become much better by using this function. As the de-
cision whether the focus is correct or not is possible by con-
firming the image on the display, the more accurate focus
becomes possible. And also, as many function regarding this
peaking operation, for example, the changing of the setting
about the width and level of peaking, the synchronizing op-
eration of peaking with the zooming position and the
COLOR PEAKING feature are introduced into this model,
this peaking function can be applied for the focusing opera-
tion in the various situation.