Ikegami VFL701A, Operation Manual

Page: 28 / 54

㻌
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 E- 20
ն ն
CAMERA No.
Sets up the
䇾
CAMERA No.
䇿
to be LED-displayed on the
FRONT TALY, if the 䇾 TALLY with CAMERA No. LED dis-
play 䇿 is used.
•
AUTO: Acquires the [CAMERA No] from the camera
side.
• 1 㹼 9: Specifies the [CAMERA No] at the VF side.
• OFF: Will not display the [CAMERA No].
The default value is 䇾 OFF 䇿 .
㻌
㻌
շ BATTERY TYPE
In a battery usage for the power supply, for appropriate set-
tings of the warning display voltage and discharge termination
voltage of the battery, be sure to set up the mode correspond-
ing to the nominal voltage of the battery being employed.
The setting values that can be selected are Ext. DC, DC
+13.2V and DC +12V.
•
EXT. DC: Stable DC power supply
• DC+13.2V: Battery with a nominal voltage of +13.2V
• DC+12V: Battery with a nominal voltage of +12V
For the nominal voltage of a battery, see the indication on the
battery main unit or the Instruction Manual of the battery.
The default value is
䇾
EXT. DC
䇿
.
㻌
㻌
7-segment
LED display
ی
Precaution
• If this feature is used by AUTO, it will not work on a
camera that has not sent the [CAMERA No] command
to the viewfinder side.