Ikegami OCP-100, Operation Manual

Page: 32 / 46

3.5 Menu Remote
When the OCP is connected to the camera or BS, the menu of the camera or BS can be remotely controlled from the OCP. To
control the menu of the camera or BS, use the PM IND/PAGE switch and UP/DOWN switches of SHUTTER, GAMMA, and
GAIN.
PANEL
ENABLE
MASTER
VF
POWER
HEAD
LINK
COLOR / PAGE PM IND
ENG FILE
LOAD
SKIN HUE QUICK START AWB ABB
CAP BARS CAL SUPER V
SUPER KNEE MATRIX
F
2
F
1
ON VAR.
E D C B A 5 4 3 2 1
STORE
1 2 3 4
5 6 7 8
HOLD MENU
BLK STRETCH
1 2 3 L H M
ON
+ 3 + + 3 7 11 3 7 11
（ % ）
GAMMA
C.TEMP
VAR.
GAIN （ dB ）
DTL
SOFT
DTL
SKIN
SHUTTER
ON
ND EFF CC
HEAD
MODE SWITCH
FILTER
AUTO SETUP
HEAD
CCU
OPT LEVEL
POWER
CAM
POWER
SCENE FILE
ON VAR. GAMMA
C.TEMP
VAR.
GAIN （
dB
）
SHUTTER
S e e l S e t t x N
PM IND/PAGE
HOLD MENU
PM IND/PAGE switch
UP/DOWN switch
OCP
1 When the PM IND/PAGE switch is held for more than 1 second, the mode is changed to menu remote mode. In the menu
remote mode, the display of the SHUTTER, GAMMA, and GAIN switches changes to
fl
ashing “Sel”, “Next”, and “Set”
respectively. Functions for each UP/DOWN switch changes as shown below.
SHUTTER ĺ Sel (select) Switch to select UP or DOWN for the menu items.
GAMMA ĺ Next (next) Switch to select the next choice (displayed only when the BS is connected.).
GAIN ĺ Set (set) Switch to accept the selection. Accept the menu selection by pressing downward ź .
2
Select a camera menu item using the UP/DOWN switch of the Sel.
3 Accept the menu selection pressing the UP/DOWN switch of the Set downward ź . Upward Ÿ direction is not used.
4 Next display is displayed only when the BS is connected.
The UP/DOWN switch of the Next is the switch to select the next choice for entering the bar title when the BS is connected.
Next switch works the same as the Sel switch for other menus.
5 Press the PM IND/PAGE switch again to cancel the menu remote mode.
Note:
If the camera menu is displayed from the OCP when the BS is connected, the characters of the menu are output to the
main video. Therefore, when operating the menu remote, be sure that the main video is not used.
To prevent the mis-operation of the menu while the main video is used, the operation of the camera menu is forcibly set to
OFF when the TALLY is ON.
Note:
Depending on the BS model, some cable extension adaptor is not displayed on the menu unless the BARS switch is set to
ON. Refer to the manuals for each BS model.
3-12 3. OPERATION
OCP-100 OCP-100 1209 VOL1 (U) (E)