Ikegami OCP-100, Operation Manual

Page: 30 / 46

- As for gain, data to be sent differs, depending on the VAR C.Temp setting.
VAR C.Temp ON : No Gain data is sent when the setting is OFF.
VAR C.Temp OFF : No Gain data is sent when the setting is ON.
- The Gain of VAR C.Temp is sent only when the camera model supports VAR C.Temp.
3.4.2 F KEY customized function 3.4.2 F KEY customized function
The F1 and the F2 switches are the only switches that can be customized.
●
Registration method
PANEL
ENABLE
MASTER
VF
POWER
HEAD
LINK
COLOR / PAGE PM IND
ENG FILE
LOAD
SKIN HUE QUICK START AWB ABB
CAP BARS CAL SUPER V
SUPER KNEE MATRIX
F 2 F 1
ON VAR.
HOLD MENU
BLK STRETCH
1 2 3 L H M
ON
+ 3 + +
3 7 11 3 7 11
（ % ）
GAMMA
C.TEMP
VAR.
GAIN （ dB ）
DTL
SOFT
DTL
SKIN
SHUTTER
ON
HEAD
MODE SWITCH
AUTO SETUP
HEAD
CCU
OPT LEVEL
POWER
CAM
POWER
The Customization-enabled Switch
- Press down the switch and the Customized
Item that has been registered will appear on
the Function Name Display.
- When the switch is blinking, the switch is set
under the Registration mode.
Selection of Registration
Functions can be selected by pressing the F1,
the F2, the VAR C.TEMP, or the GAMMA switch.
1 Press down either the F1 or the F2 switch for about 1 second. The OK sound will be generated and the F1 or the F2 switch
lamp will blink.
2 The name of a function will appear on the Display at the center. By operating the UP/DOWN switch, the function indicated
on the screen will be altered. When the UP/DOWN switch is operated, the displayed function will be registered.
3 To exit from the ”REGISTRATION” mode, press down the F1 or the F2 switch.
3-10 3. OPERATION
OCP-100 OCP-100 1209 VOL1 (U) (E)