E-7
①
Camera fixing screws (base rotation)
These are screws to lock the camera in the desired rotation position.
Fix these screws after setting the viewing position. If you do not get a
desired FOV, try to use the other fixing screw on a different position, A or B,
to have a desired field of view.
②
Lens fixing screws(elevation)
These are screws to fix the camera in the desired elevation position.
Fix these screws after setting the viewing position.
③
Camera unit with vari-focal lens and 3 axis adjustable pedestal
④
Monitor output connector (MONI.OUT)
This RCA type connector is an output of video signal for local testing or for
monitoring. This is useful for camera setup and lens adjustment.
⑤
Setup adaptor connector
This is for a setup adaptor while making camera setups and adjustments
⑥
Power cable
This is a power cable. Non-polarity AC24V (AC 21.6V ~ 26.4V) or DC12V
has to be connected. Check the power voltage from the external power
supply before applying power to the camera.
* This installation should be made by a qualified service person and should
conform to all local codes.
⑦
Video Output cable (BNC)
This is the output of video signal. Connect this to a monitor or switcher.
⑧
Plinth (Camera unit base)
⑨
Ornamental ring
⑩
Clear Dome Cover with inner dome cover
⑪
Fixing holes (two key hole slots)
⑫
Setup adapter
⑬〜⑰
Switches for camera setup
